Overview:

iGate EW12ST is is a high - performance Wi-Fi mesh router, it support MU-MIMO allows multiple devices to access the network at the same time with equal and full speed, ensure the simultaneous and stable connection of multiple devices.

iGate EW12ST uses advanced Wi-Fi technology standard 802.11ac wave 2, provides gigabit network interface, works simultaneously on 2 bands of 2.4GHz and 5GHz, wireless transmission rate can reach up to 1200Mbps, supports rich software features, capable of connecting multiple devices together to establish a uniform Wi-Fi Mesh network with only an SSID.

Key features:

iGate EW12ST can perform as a Wi-Fi Router providing Wi-Fi connection, Wan Service via Ethernet connection or Wi-Fi repeater (receive Wi-Fi signal from other Access Points and sharing this for connected users). Especially with the Mesh function, the device easily setup to expand Wi-Fi coverage, provide a seamless, high-speed connectivity. iGate EW12ST is a powerful Mesh solution that provides perfect Wi-Fi coverage in every corner of your home, store, office.

Specifications:

Hardware
Chip MT7621A + MT7615D
RAM 128MB DDR3
Flash 16MB NOR
Interfaces
• QCVN 54:2020/BTTTT
• QCVN 65:2021/BTTTT
WAN 1x Ethernet port
1x 10/100/1000Base –T
LAN 1x Ethernet port
1x 10/100/1000Base –T
LEDs & Buttons
Buttons 1x Reset/WPS Button
LEDs 7 Wi-Fi LEDs
Power
Input 100-240V – 50/60Hz
Output DC12V - 1A
WiFi
IEEE Standards 802.11a/b/g/n/ac wave2
802.11k,v,r
PHY Rate 2.4GHz: 300Mbps
5GHz: 867Mbps
Channel Bandwidth 2.4GHz: 20/40MHz
5GHz: 20/40/80MHz
Frequency 2.412GHz - 2.472GHz
5.180GHz - 5.825GHz
SSID 8 SSIDs (2 SSIDs/radio)
CCU 100 Users/radio
Radio Dual Radio
2.4GHz: MIMO 2x2:2
5GHz: MIMO 2x2:2
Antenna Internal Omni antenna
2.4GHz: MIMO 2x2, 3dBi
5GHz: MIMO 2x2, 3dBi
MU-MIMO, Beamforming
EIRP 23 dBm (2.4Ghz)
23 dBm (5Ghz)
Others
Operating temperature 0ᵒC ÷ 50ᵒC
Operating humidity 10% ÷ 90%
Storage temperature -40°C ÷ 70°C
Dimension Ø122 x 76.2mm
Standard Certification QCVN 54:2020/BTTTT
QCVN 65:2021/BTTTT